My Circuit

This project flashes eight LEDs in an apparently random manner. It uses a 4060 combined counter and display driver IC which is designed for driving 7-segment LED displays. 8 Random Flashing LEDs Circuit Diagram The sequence is not really random because seven of the LEDs would normally be the display segments, the eighth LED is driven by an output that is normally used for driving further counters. The table below shows the sequence for the LEDs. You can use less than eight LEDs if you wish and the table may help you decide which ones to use for your purpose.

Description Private branch exchange This project is aimed to make the low cost intercom system by which eight telephone lines can be interfaced with this hardware. Main card: In this card there is 89c51 micro controller is used. Micro controller is controller the DTMF encoder MT8870 and the Analog switch MT8816. SLIC card: In this card there is constant current source is used to activate the telephone. The lm339 is used to detect the hand off and hand on condition. There is same circuit are repeated because we have to interface the 8 telephone. Summary: When the telephone is hand on the output of the lm339 change, it is detected by micro controller that the telephone is hand on, then micro controller is make the analog channel by using the MT8816. the LM555 is used to generate the dial tone.    Circuit diagram Click on Image And Zoom  Author : Ashad mustufa E-mail: mustufa66@hotmail.com Source : http://www.electronics-lab.com