My Circuit

Here is a compact low cost FM radio circuit using IC TDA 7000. This circuit is designed as per the data sheet and the result is excellent.Ideal for all category of electronic enthusiasts. Single Chip FM Radio Circuit Diagram The TDA7000 is a monolithic integrated circuit for mono FM portable radios, where a minimum on peripheral components is crucial. The IC TDA 7000 has a Frequency-Locked-Loop system with an intermediate frequency of 70 kHz. The intermediate frequency selectivity is achieved by active RC filters. The only function which needs alignment is the resonant circuit for the oscillator, thus selecting the reception frequency. Spurious reception is avoided by means of a mute circuit, which also eliminates too noisy input signals. Special steps are taken to meet the radiation requirements.  Notes:   For L1 and L2 wind 5 turns of 0.6 mm enameled Copper wire on a 4 mm dia plastic former. For antenna use a 50mm long insulated copper wire. IC TDA 7000 can withstand up...

Ready Bluetooth solutions are often quite expensive. The cheapest Bluetooth modules that are currently commercially available, there are from the Chinese manufacturer Rayson . The modules BTM-112 (Class 2) and BTM-222 (Class 1) each cost around 15 €. Since the modules are designed for 3.3V supply voltage is required for connection to a 5V system in addition to a 3.3V voltage regulator for 2 level converter (Level Shifter) for the UART signals. In addition, you do not want to give up a status display with LED safely. The price of a module is still all in all about 20 €. The circuit The circuit of the Bluetooth module is designed to operate on a 5V system. As a voltage regulator, a controllable LM317L is used.Similarly, a 3.3V voltage regulator such as the LF33CV could be used. Level converter A level converter (English Level Shifter) is used to adjust signal levels of different voltage levels. A typical example of a level converter is for example a RS232 converter. This converts the 1...