TDA8922 g eneral description: The TDA8922 is a high efficiency class-D audio power amplifier with very low dissipation. The typical output power is 2 × 25 W. The device is available in the HSOP24 power package with a small internal heatsink and in the DBS23P through-hole power package. Depending on the supply voltage and load conditions, a very small or even no external heatsink is required. The amplifier operates over a wide supply voltage range from ±12.5 to ±30 V and consumes a very low quiescent current. TDA8922 Audio Amplifier 2 x 25W TDA8922 features : High efficiency (∼90%) Operating supply voltage from ±12.5 to ±30 V Very low quiescent current Low distortion Usable as a stereo Single-Ended (SE) amplifier or as a mono amplifier in Bridge-Tied Load (BTL) Fixed gain of 30 dB in Single-Ended (SE) and 36 dB in Bridge-Tied Load (BTL) High output power Good ripple rejection Internal switching frequency can be overruled by an external clock No swi...
Posts
Implementation of customized SCADA for X-Ray Machine Abstract This paper is an effort to enable the Delta PLC (Programmable Logic Controller) DVP14SS to communicate with the Visual Basic 6.0 using Modbus.DLL. The communication between DVP14SS and Visual Basic 6.0 is via Modbus Serial Protocol stated by Delta PLC manufactures. In automated systems there is control supervision, and also health and safety monitoring via supervisory control and data acquisition (SCADA) systems. Values of important parameters such as temperatures, pressures, voltages, etc. are sensed and transferred to monitoring stations in control rooms. After processing the information, decisions are made and supervisory commands are sent to change conditions such as set points or to engage emergency procedures. The data from sensors and set commands to actuators are sent via wired or wireless communication channels. So, communication mechanisms are an integral part of any complex automated system. The S...